Trimble SPS851 & SPS882 Base Rover Receiver kit TSC3
Trimble SPS851 & SPS882 GPS GNSS Base Rover Receiver kit with TSC3 Data Collector, SCS900 Software Version 3.60 installed
$6,000
Trimble SPS851 Base Receiver, Internal 900 MHz Radio, Battery & Bluetooth.
Trimble SPS882 Rover Receiver, 900 MHz Rx Internal Radio
Trimble TSC3 Data Collector Touch Screen with Stylus, SCS900 Software Version 3.60
All in great tested condition with a 6-month Warranty and 30-day money back guarantee.
Package includes:
- 1x Trimble SPS851 Base Receiver
- 1x Trimble Zephyr Geodetic Model 2 Antenna
- 1x Antenna Cable
- 1x 900 MHz Radio Antenna
- 1x Multiport Data Adapter
- 1x External Antenna Kit
- 1x 120v Wall Charger
- 1x 12V Power Supply
- 1x Alligator Clips
- 1x Trimble SPS882 Rover Receiver
- 1x Dual Battery Charger
- 2x Lithium Ion Batteries
- 1x 00 MHz Radio Antenna
- 1x Serial Data Cable
- 1x Trimble TSC3 Data Collector
- 1x TSC3 Rod Bracket
- 1x Pack of Screen Protectors
- 1x USB Data Cable
- 1x Wall Charger
- 1x Snap-Loc Rover Rod
- 1x Bipod
- 1x Soft Case
- 1x Trimble Transport Case
- 6-month warranty
- 30-day money back guarantee
Trimble SPS851 Specifications
| GENERAL | |
| Keyboard and display | VFD display 16 characters by 2 rows |
| On/Off key for one button startup using AutoBase technology | |
| Escape and Enter key for menu navigation | |
| 4 arrow keys (up, down, left, right) for option scrolls and data entry | |
| Dimensions (L x W x D) | 24 x 12 x 5 cm (9.4 x 4.7 x 1.9 in) |
| Weight | 1.55 kg (3.42 lb) receiver with internal battery and no radio |
| 1.65 kg (3.64 lb) receiver with internal battery and radio | |
|
ANTENNA OPTIONS |
|
| L1/L2/L2C GPS, GLONASS & OmniSTAR operation | Zephyr™ Model 2 |
| L1/L2/L2C GPS & GLONASS Base Station | Zephyr Geodetic™ Model 2 |
| Supports legacy Trimble antennas | Zephyr, Zephyr Geodetic, Z+, Micro-Centered™, Choke ring, Rugged Micro-Centered GPS L1/L2 |
| ENVIRONMENTAL | |
| Operating | –40 °C to +65 °C (–40 °F to +149 °F) |
| Storage | –40 °C to +80 °C (–40 °F to +176 °F) |
| Humidity | MIL-STD 810F, Method 507.4 |
| Waterproof | IP67 for submersion to depth of 1 m (3.3 ft), dustproof |
| Shock, non operating | Designed to survive a 1 m (3.3 ft) pole drop onto a hard surface to 75 g, 6 ms |
| Shock, operating | To 40 g, 10 ms, saw-tooth |
| Vibration | Tested to Trimble ATV profile (4.5 gRMS): 10 Hz – 300 Hz: 0.04 g2/Hz 300 Hz – 1,000 Hz; -6 dB/octave |
| MEASUREMENTS | |
|
|
| CODE DIFFERENTIAL GPS POSITIONING | |
| Horizontal accuracy | ±(0.25 m + 1 ppm) RMS, ± (0.8 ft + 1 ppm) RMS |
| Vertical accuracy | ±(0.50 m + 1 ppm) RMS, ± (1.6 ft + 1 ppm) RMS |
| SBAS (WAAS/EGNOS/MSAS) | |
| Horizontal accuracy | Typically <1 m (3.3 ft) |
| Vertical accuracy | Typically <5 m (16.4 ft) |
| OmniSTAR positioning | |
| VBS service accuracy | Horizontal <1 m (3.3 ft) |
| XP service accuracy | Horizontal 0.2 m (0.66 ft), Vertical 0.3 m (1.0 ft) |
| HP service accuracy | Horizontal 0.1 m (0.33 ft), Vertical 0.15 m (0.5 ft) |
| RTK positioning | |
| Horizontal accuracy | ±(10 mm + 1 ppm) RMS, ± (0.032 ft +1 ppm) RMS |
| Vertical accuracy | ±(20 mm + 1 ppm) RMS, ± (0.065 ft +1 ppm) RMS |
| INITIALIZATION TIME | |
| Regular RTK operation with base station | Single/Multi-base minimum 10 sec + 0.5 times baseline length in km, <30 km |
| RTK operation with Scalable GPS infrastructure | Typically, <30 seconds anywhere within coverage area |
| Initialization reliability | Typically >99.9% |
| POWER | |
| Internal | Integrated internal battery 7.4 V, 7800 mA-hr, Lithium-ion |
| Internal battery operates as a UPS in the event of external power source failure | |
| Internal battery will charge from external power source when input voltage is >15 V | |
| Integrated charging circuitry | |
| External | Power input on Lemo 7-pin 0-shell is optimized for lead acid batteries with a cut-off threshold of 10.5 V |
| Power input on the 26-pin D-sub connector is optimized for Trimble | |
| Lithium-ion battery input (P/N 49400) with a cut-off threshold of 9.5 V | |
| Power source supply (Internal/External) is hot-swap capable in the event of power source removal or cut off | |
| 9.5 V to 28 V DC external power input with over-voltage protection | |
| Receiver will automatically turn on when connected to external power | |
| Power consumption | 6 W, in rover mode with internal receive radio |
| 8 W in base mode with internal transmit radio | |
| OPERATION TIME ON INTERNAL BATTERY | |
| Rover | 450 MHz 2.0 W systems: 12 hours; varies with temperature |
| 900 MHz 1.0 W systems: 12 hours; varies with temperature | |
| Base | External radio: 14 hours; varies with temperature |
| 450 MHz 0.5 W systems: 10 hours; varies with temperature | |
| 900 MHz 1.0 W systems: 9 hours; varies with temperature | |
| REGULATORY APPROVALS | |
|
|
| COMMUNICATIONS | |
| Port 1 (7-pin 0S Lemo) | 3-wire RS-232/CAN |
| Port 2 (26-pin D-sub) | Full RS-232 (through multi-port adaptor), 3-wire RS-232 |
| 1PPS (1 Pulse per second) | Through adaptor cable |
| USB (On the Go) | Through mutli-port adaptor |
| Ethernet | Through mutli-port adaptor |
| Bluetooth | Fully-integrated, fully-sealed 2.4 GHz Bluetooth module |
| Fully-integrated, fully-sealed internal 450 MHz (UHF), Tx, Rx, or Tx/Rx | |
| Integrated radios (optional) | Fully-integrated, fully-sealed internal 900 MHz, Tx, Rx, or Tx/Rx |
| Channel spacing (450 MHz) | 12.5 KHz or 25 KHz spacing available |
| 450 MHz transmitter radio power output | 0.5 W / 2.0 W (2.0 W upgrade available only in certain countries) |
| Frequency approvals (900 MHz) | USA/CAN (-10), New Zealand/Australia (-20), Australia (-30) |
| 900 MHz transmitter radio power output | 1.0 W (30 dBm) |
| External GSM/GPRS, cellular phone support | Supported for direct dial and Internet-based VRS correction streams |
| Cellular phone or GSM/GPRS modem inside a TSC2 controller | |
| Receiver position update rate | 1 Hz, 2 Hz, 5 Hz, 10 Hz, and 20 Hz positioning (varies by receiver model) |
| Correction data input | CMR, CMR+, RTCM 2.0 (select RTCM 2.1), RTCM 2.1–2.3, RTCM 3. |
| Correction data output | CMR, CMR+, RTCM 2.0 (select RTCM 2.1), RTCM 2.1–2.3. |
| Data outputs | NMEA, GSOF, 1PPS Time Tags |
Trimble SPS882 Specifications
| GENERAL | |
| Keyboard and display | LED indicators for satellite tracking, radio link reception and power monitoring On/Off key for one-button startup |
| Dimensions (W x D) | 19 x 11.2 cm (7.5 x 4.4 in) |
| Weight | 1.35 kg (2.97 lb) receiver only including radio and battery |
| ENVIRONMENTAL | |
| Operating | –40 °C to +65 °C (–40 °F to +149 °F) |
| Storage | –40 °C to +75 °C (–40 °F to +167 °F) |
| Humidity | 100%, condensing |
| Waterproof | IP67 for submersion to depth of 1 m (3.3 ft), dustproof |
| Pole drop | Designed to survive a 2 m (6.6 ft) pole drop onto concrete |
| MEASUREMENTS | |
|
|
| CODE DIFFERENTIAL GPS POSITIONING | |
| Horizontal accuracy | 0.25 m + 1 ppm RMS (0.8 ft + 1 ppm RMS) |
| Vertical accuracy | 0.50 m + 1 ppm RMS (1.6 ft + 1 ppm RMS) |
| REAL-TIME KINEMATIC POSITIONING | |
| Horizontal accuracy | 8 mm + 1 ppm RMS (0.026 ft + 1 ppm RMS) |
| Vertical accuracy | 15 mm + 1 ppm RMS (0.05 ft + 1 ppm RMS) |
| TRIMBLE XFILL | |
| Horizontal accuracy | RTK4 + 10mm/minute RMS |
| Vertical accuracy | RTK + 20mm/minute RMS |
| INITIALIZATION TIME | |
| RTK operation with a single base station | 1 second; + 1 second per 10 km |
| Regular RTK operation within RTK network | Minimum 1.5 seconds; + 0.5 seconds per 10 km |
| Initialization reliability | >99.9% |
| POWER | |
| Internal | Rechargeable, removable 7.4 V, 2.4 Ah |
| Lithium-ion battery in internal battery compartment | |
| External | External power input with over-voltage protection |
| 11 V DC to 28 V DC external power input | |
| Power consumption | 3.2 W, in RTK mode with internal radio |
| OPERATION TIME ON INTERNAL BATTERY | |
| Rover | 5 hours; varies with temperature |
| Base station with internal radio | 3.7 hours; varies with temperature |
| REGULATORY APPROVALS | |
|
|
| COMMUNICATIONS | |
| Lemo (Serial) | 7-pin 0S Lemo, Serial 1, 3-wire RS-232 |
| Modem 1 (Serial) | D-sub, Serial 2, Full 9-wire RS232 |
| Bluetooth wireless technology | Fully-integrated, fully-sealed 2.4 GHz |
| Bluetooth module | |
| Integrated radios (optional) | Fully-integrated, fully-sealed internal 450 MHz (UHF) Tx/Rx |
| Internal 900 MHz Tx/Rx | |
| Internal radio output | 0.5 W |
| External GSM/GPRS, cell phone support | Supported via the SCS900 and SPS controller |
| Receiver position update rate | 1 Hz, 2 Hz, 5 Hz, 10 Hz, and 20 Hz positioning |
| Correction data input/output | CMR™, CMR+™, CMRx, RTCM3, RTCM 2.x (with Rover/Base upgrade) |
| Data outputs | NMEA, GSOF |
